Steel grout-in table base with 3” diameter round column for 30” high table.

0

0

Be the 1st to vote.

Steel grout-in table base with 3” diameter round column and ADA-compliant top plate for 30” high table.

0

0

Be the 1st to vote.

Steel grout-in table base with 3” diameter round column for 42” high table.

0

0

Be the 1st to vote.

Steel bolt-down table base with 3” diameter round column and 8” diameter escutcheon ring for 30” high table.

0

0

Be the 1st to vote.

Steel bolt-down table base with 3” diameter round column, ADA-compliant top plate and 8” diameter escutcheon ring for 30” high table.

0

0

Be the 1st to vote.

Steel bolt-down table base with 3” diameter round column and 8” diameter escutcheon ring for 42” high table.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 22” x 22” cross-base and 3” diameter round column for 30” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 22” x 22” cross-base and 3” diameter round column for 42” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 30” x 30” cross-base and 3” diameter round column for 30” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 30” x 30” cross-base and 3” diameter round column for 42” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 36” x 36” cross-base and 3” diameter round column for 30” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 36” x 36” cross-base and 3” diameter round column for 42” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 22” x 30” cross-base and 3” diameter round column for 30” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 22” x 30” cross-base and 3” diameter round column for 42” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 5” x 22” straight-base and 3” diameter round column for 30” high table. Please note 2 of these bases are required per table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 5” x 22” straight-base, ADA-compliant top plate and 3” diameter round column for 30” high table. Please note 2 of these bases are required per table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 5” x 22” straight-base and 3” diameter round column for 42” high table. Please note 2 of these bases are required per table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 18” diameter round-base and 3” diameter round column for 30” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 18” diameter round-base and 3” diameter round column for 42” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 22” diameter round-base and 3” diameter round column for 30” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 22” diameter round-base and 3” diameter round column for 42” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 30” diameter round-base and 3” diameter round column for 30” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Stamped steel Labor-Saver freestanding table base with 30” diameter round-base and 3” diameter round column for 42” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Steel Labor-Saver freestanding table base with 18” x 18” square-base and 3” thick square column for 30” high table. On our Labor-Savers table bases, the top plate is welded to the column with only one bolt needed to attach the base.

0

0

Be the 1st to vote.

Part of FCI’s Alder series of outdoor furniture, the ALD16S outdoor chair is constructed of a core-drilled, powder-coated aluminum frame with a slat back and composite plank seat. Please note that the seat does not swivel.

0

0

Be the 1st to vote.

Part of FCI’s Alder series of outdoor furniture, the ALD17 & ALD48 outdoor benches are constructed of core-drilled, powder-coated aluminum frames with composite plank seats.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM18 & HEM48 outdoor benches are constructed of clip-down, powder-coated aluminum frames with composite plank seats.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM48B park bench is constructed of a sturdy metal frame with a composite slat seat.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM58RADB park bench is constructed of a sturdy curved metal frame with a composite slat seat.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM64B park bench is constructed of a bent metal frame with composite slat back and seat.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM48C outdoor cluster seat is constructed of a clip-down, powder-coated aluminum frame with 4 composite plank seat chairs and a 34 1/4” x 48” composite plank table top. Please note that seats do not swivel.

0

0

Be the 1st to vote.

Part of FCI’s Alder series of outdoor furniture, the ALD48T & ALD30T outdoor tables are constructed of core-drilled, powder-coated aluminum frames with composite plank table tops.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM48T, HEM48TADA & HEM30T outdoor tables are constructed of clip-down, powder-coated aluminum frames with composite plank table tops. HEM48TADA includes an ADA symbol incorporated into the top.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM22T outdoor accent table is constructed of a clip-down, powder-coated aluminum frame with a composite plank top.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM10WE outdoor waste enclosure is constructed of sturdy metal frame with composite plank sides and top.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM30WE outdoor waste enclosure is constructed of sturdy metal frame with composite plank sides and top with a top tray shelf.

0

0

Be the 1st to vote.

Part of FCI’s Hemlock series of outdoor furniture, the HEM20P outdoor planter is constructed of sturdy metal frame with composite plank sides and fiberglass lining.

0

0

Be the 1st to vote.

Part of FCI’s Contemporary collection, the 8904 is composed of a patented, formed-plywood and laminate-covered seat and back attached to a durable metal frame. Personalize the 8904 with a number of available or custom back cut-out options (minimum order required).

0

0

Be the 1st to vote.

Part of FCI’s Contemporary collection, the 8904s is a coordinating stool for the 8904 chair, and is composed of a patented, formed-plywood and laminate-covered seat and back attached to a durable metal frame with a coordinating metal foot rail to protect the finish. Personalize the 8904s with a number of available or custom back cut-out […]

0

0

Be the 1st to vote.

Part of FCI’s Contemporary collection, the 8722s is constructed from welded and powder-coated rings forming a sturdy frame with a comfortable upholstered seat.

0

0

Be the 1st to vote.

Part of FCI’s Contemporary collection, the 8707s features an elegant, timeless design with a sturdy metal base and a comfortable upholstered seat.

0

0

Be the 1st to vote.

Part of FCI’s Contemporary collection, the 8703s is constructed of a sturdy metal base with a deep upholstered seat.

0

0

Be the 1st to vote.

Part of FCI’s Vintage Industrial collection, the 6073 is formed and welded for a strong, durable single-piece chair.

0

0

Be the 1st to vote.

Part of FCI’s Vintage Industrial collection, the 6073s is a coordinating stool for the 6073 chair, is formed and welded for a strong, durable single-piece stool.

0

0

Be the 1st to vote.

Part of FCI’s Vintage Industrial collection, the 6072s is a coordinating stool for the 6072 chair, is formed and welded for a strong, durable single-piece stool.

0

0

Be the 1st to vote.

Part of FCI’s Vintage Industrial collection, the 6072st is a stackable version of the 6072 chair (4 high) and is formed and welded for a strong, durable single-piece chair.

0

0

Be the 1st to vote.

Part of FCI’s Vintage Industrial collection, the 5912s is composed of a strong tube-steel base with a height-adjustable hardwood top.

0

0

Be the 1st to vote.

Part of FCI’s Vintage Industrial collection, the 5911 features a durable metal frame and back with a plywood seat cover.

0

0

Be the 1st to vote.

Part of FCI’s Vintage Industrial collection, the 5910 is constructed with a strong metal frame and hardwood seat and back.

0

0

Be the 1st to vote.

Part of FCI’s Vintage Industrial collection, the 5907 is built with a sturdy metal frame and plywood seat and back.

0

0

Be the 1st to vote.